Skip to content
Leaf guard being installed on seamless aluminum gutters

Gutter guard installation near Minneapolis

Leaf guard installation that stops the fall ladder climb.

Looking for gutter guard installation near you? We fit leaf guards on existing gutters or with a new seamless system across Minneapolis, St. Paul, and western Wisconsin — mesh, solid, or screen matched to your trees.

  • Fits existing or new gutters
  • 3 guard types from our price list
  • Cleaning included when guards go on

500+

homes across the Twin Cities

62,000

ft of seamless gutter installed

5 ★

78 reviews on Google

5 min

average reply during business hours

Instant estimate

Price your leaf guards in 60 seconds.

No email required — move the sliders and see a real local range.

Get my price in 60 seconds

Leaf guard Minneapolis installs

Local gutter guard installation — not a national one-size pitch.

“Gutter guard installation near me” is one of the highest-demand searches in this category. The work itself is local: correct pitch, sound hangers, the right opening size for your debris, and water that still reaches the outlets in a Minnesota downpour.

We install leaf guards on gutters that are already performing, or we roll new seamless aluminum on site with our New Tech Machinery MACH II 5/6 and add protection the same day. Either path starts with an honest look at the run — we will not cover a system that needs repair first.

Choose plastic screen ($6/ft), aluminum mesh ($7/ft), or solid aluminum ($8/ft). Cleaning is included when guards mount the same visit.

  • Install on existing gutters when pitch and hangers are sound
  • Same-day add-on with new seamless gutter installation
  • Mesh for needles; solid for heavy leaf volume; plastic for light loads
  • Attaches to the gutter — not slid under shingles that void roof warranties
  • 5-year written workmanship warranty
  • Serving Minneapolis, St. Paul, and western Wisconsin within ~140 miles
Compare guard types
Close-up of installed leaf guard on aluminum gutter

Gutter guard installation near you

Fitted on existing gutters — or with a new system.

Searching for gutter guard installation near me usually means one of two jobs: protect gutters that still pitch correctly, or add guards the same day we roll new seamless aluminum. We do both across Minneapolis, St. Paul, and western Wisconsin.

1

Inspect the run

We check pitch, hangers, seams, and fascia before anything is ordered. Sagging or leaking gutters get fixed or replaced first — a guard on a bad run only hides the failure.

2

Clear the channel

Debris comes out by hand and downspouts are flushed. Cleaning is included when guards go on, because nothing mounts on a packed trough.

3

Fit the guard type

Plastic screen, aluminum mesh, or solid aluminum — cut and fastened so water still finds the outlets under Minnesota rain.

4

Walk the result

We confirm flow, bag the waste, and leave you with what was installed and how to schedule an occasional rinse later.

Plastic screen

$6/ft

Budget option for sheds, short runs, or light debris — not our first pick under heavy pines.

Aluminum mesh

$7/ft

Best everyday leaf guard for Minneapolis lots with mixed trees and pine needles.

Solid aluminum

$8/ft

Surface-style cover for heavy leaf volume and seed pods; highest durability of the three.

Leaf guard Minneapolis installs — local realities

Leaf guard Minneapolis searches often mix brand names with generic protection. We install the three guard styles on our price list — not a franchise helmet product — and match the design to your trees instead of one catalog SKU. Oak and maple lots need volume handling; pine belts need fine mesh that needles cannot weave through. Compare options on guard types before you book.

Most single-family installs finish in a day when the gutters are already sound. New seamless gutters plus guards share the same ladder day on our New Tech Machinery MACH II 5/6. Work carries a 5-year written workmanship warranty. Price a run in guards mode, or start from the gutter guards overview if you are still weighing cleaning vs protection.

After installation

Less cleaning. Not zero attention — forever.

Guards keep leaves, needles, and seed pods out of the channel. Fine grit from shingles still washes through over years, so plan an occasional rinse — far lighter than a packed autumn clean. If ice dams are your main worry, that is attic ventilation and insulation; we will say so instead of selling a guard as a cure.

Want the overview and payback math first? Start at the gutter guards hub. Ready for a number on your footage? Use the calculator in guards mode.

  • Occasional rinse every few years, not twice each autumn
  • Photo of what we installed available if you are not home
  • Internal path: types → installation → calculator
Price guards now
Finished leaf guard install on a Twin Cities home

What it costs

Straight answer before you call

Prices below are for a typical single-story home with about 125 feet of roofline. Two stories add $1.50 per foot for ladder work.

Service Typical price Included
Seamless gutter installation from $1,320 gutters, downspouts, installation
Leaf guards from $750 material and fitting
Gutter cleaning $150–300 full clear-out plus photo report
Ice dam removal from $450 call-out and steam removal
Old gutter removal $2 per foot tear-off and haul away
Get your exact price in 60 seconds

No visit, no phone tag — just an honest range for your house.

Four steps, no sales pressure

The same manager stays with your project from the first call to the final walkthrough.

  1. 1

    Get a price online

    Move three sliders and see a real range. No form, no waiting.

  2. 2

    We confirm it

    Your manager checks the roofline and calls back within 5 minutes.

  3. 3

    Pick your date

    Choose a slot that works. We show up when we said we would.

  4. 4

    We build and clean up

    Gutters rolled on site, installed, debris hauled away — most homes in one day.

Recent work

Real houses, real numbers

Every project below is ours — address area, actual price and time on site. These are representative jobs from our 500+ projects across the Twin Cities.

New seamless gutters on a Burnsville two-story home

Burnsville, MN

Full replacement + guards

168 ft · 2 stories

$2,340 1 day
Fresh 6-inch seamless aluminum gutters on a Minneapolis steep-roof home

Minneapolis, MN

Seamless 6" on a steep roof

212 ft · 2 stories

$3,120 1.5 days
Cleared roof edge with heat cable after ice dam work in Hudson Wisconsin

Hudson, WI

Ice dam removal + heat cable

95 ft · 1 story

$1,180 Same day

Where we work

Based in Rockford, MN

We cover the metro and western Wisconsin within about 140 miles. Not on the list? Call us — if we can't help, we'll tell you who can.

Questions people ask before calling

Can you add guards to my existing gutters?
Yes. If your gutters are in good shape and properly pitched, we install guards directly on them. If they are sagging or damaged, we tell you before adding anything — a cover on a bad run only hides the problem.
Which type of guard do you recommend?
It depends on your trees. Aluminum mesh handles pine needles and mixed debris best for most Minneapolis lots. Solid aluminum suits heavy leaf volume and seed pods. Plastic screen is the budget option for light loads and short runs.
Do guards really eliminate cleaning?
They eliminate the regular ladder-climbing for leaves. You will still want an occasional rinse every few years for fine grit and shingle granules, especially after severe storms.
How much does gutter guard installation cost?
Installed pricing is $6/ft plastic screen, $7/ft aluminum mesh, and $8/ft solid aluminum. Cleaning is included when guards go on the same day.
Do you serve “near me” outside Minneapolis?
We work within about 140 miles of Minneapolis — St. Paul, Burnsville, Bloomington, Maple Grove, Plymouth, Hudson WI, River Falls WI, and nearby suburbs. Google “near me” results still depend on maps and reviews; this page is the local install detail.
Is this the same as a gutter helmet?
People often use “helmet” to mean a solid surface-style cover. We install solid aluminum from our price list. We do not claim the Helmet brand unless a job specifically calls for that product — see our types page for an honest comparison.

Free on-site measure

Want someone to come measure?

Skip the online calculator. Request a free visit — we measure the roofline in person, confirm the exact scope, and leave you with a clear number. No obligation.

  • We measure on site

    Linear feet, stories, downspouts, and access — checked in person

  • Reply within 5 minutes

    During business hours, seven days a week

  • Free either way

    The measure visit is free whether you book the job or not

Format: (612) 555-1234

Where we should come measure

Free visit. We reply within 5 minutes.

Measure visit requested

Your manager will call within 5 minutes to set a time to come measure.

Still deciding? Get the number first.

No visit, no obligation — just an honest range for your house in under a minute.

Call Get my price